Install Kit No 3: (Panel Option C) with Tank 1 or 2 Selector Switch on Panel with second 3-way valve with Schenker Panel Integration.
The kit includes the following:
- Panel Option D. The black panel serves as a mounting platform for the Panel Mount TDS Meter and Auto TDS or Purge Switch. Panel also adds a Switch to select routing of the product water from Tank 1 to Tank 2 via an additional auto 3-Way Valve. With cut-out for Schenker Basic or Mini-Touch Panel integration onto Panel.
- 30ft of ¼” product water line and fittings. This is used to send the fresh drinking water to your tank. Schenker provides an 8mm line, which in the USA can be difficult to find easily sourced fittings. We provide the ¼” push-to-connect fittings that will end the hose in a male ¼” NPT to interface with your boat lines and fittings.
- Automatic Motorized DC Voltage 3-Way Valve. Motorized valve is controlled by the Panel Mount TDS Meter to automatically send the product water TO or AWAY from your ships water tanks based on the water quality set-point. The valve also has a manual bypass in the evet of an electronics failure for back-up redundancy.
- Second Automatic Motorized DC Voltage 3-Way Valve. The second automated 3-way valve routes the product water to Tank 1 or Tank 2 using an on-Panel selector switch.
- Panel Mount TDS Continuous Meter with Alarm and Relay outputs. This will give you a continuous real-time reading of the product water quality with programmable audible alarm and controls the automatic 3-way valve to send the water to your tanks or a discharge location. TDS Meter is present with values of 480ppm as the lower value to send the product water to your ships tank and 500ppm as the value to divert the product water away from your ships tank to a discharge location.
- Product Water Pressure Relief Valve. Comes pre-plumbed on the 3-Way Valve assembly to prevent over pressurizing of the product water lines when valve is rotating.
- Auto TDS/Purge Switch. The Purge Switch over-rides the TDS Meter Control of the 3-Way Valve and send the product water to the plumbing diversion line location. When the Switch is in the “Auto TDS Position” the TDS Meter activates and continually monitors the product water and controls the 3-way valve sending the product water To or Away from the ships water tanks.
