Watermaker Install Kit No1 for Manual Operation
Install Kit No 1: Hand Held TDS Meter and Manual 3-Way Valve
From our experience with installations, there are a few parts that will make the watermaker installation and operation easier, so we have put together the install kits. Kit No 1 includes the following:
- 30ft of ¼” product water line and fittings.
This is used to send the fresh drinking water to your tank. Schenker provides an 8mm line, which in the USA can be difficult to find easily sourced fittings. We provide the ¼” push-to-connect fittings that end the hose in a male ¼” NPT to interface with your boat lines and fittings.
- 3-Way Valve.
This non-blocking valve can be either bulkhead or panel mounted allowing you to route the product water to a Sample position at start-up and then to your ships Tank once you have checked the product water quality.
- Hand Held TDS Meter.
This is used to check the product water quality by filling a glass of watermaker water.
Kit includes the following items:
- Manual 3-way product water valve
- 30ft 1/4″ Product water line with fittings to connect to ships water tank
- Hand held TDS Meter
